Super Easy and Inexpensive Brass Chandelier DIY

Oh the 1980's brass chandelier. Seems like every house built in that decade sported one of these. And I still had one hanging over my dining room table that was in need of a serious makeover.  (I'm horrible at taking before pics, so the one below is a stock photo. Mine was not as pretty in person.)Let me remind you that I spent 13 years in my home before I started decorating.  And thus, I haven’t changed out any of the lighting in the house. I’m redesigning my entire home on a serious budget. At the beginning of my venture, money was extremely tight, so I used whatever pennies I could scrape up to complete small projects here and there. I never had a furniture or fixture budget, I just worked with pieces on hand and tried to update them a bit. This turned out incredibly beneficial because it allowed me to learn my signature decorating style, fine tune DIY skills and navigate the design process without spending a fortune.This post contains affiliate links. If you make a purchase after clicking on a link, I make a small commission at no cost to you. Read my full disclosure here.  These brass chandeliers actually have great bones. The curves are classic and I have an affinity for traditional décor; however, the cheap-looking brass finish is just well, cheap looking. On a whim one morning I decided to give it a refresh.I originally planned to take the chandelier down and spray paint it. That was a fleeting thought because my inexperience with electrical wiring and fear of getting shocked scared any creativity out of me. Plus, my husband was at work and I dared not take it down without being able to get it back up there.I thought about building a spray tent in the dining room but was too lazy to figure all that out. Alas, necessity is the mother of invention. I searched feverishly through my craft and event supplies and came up with a super cheap solution: Rub 'N Buff. Perfect. I pulled out the ladder and got to work on the chandelier. The whole project took me about an hour and cost zero dollars.Rub 'N Buff is a wax-based liquid metallic paint. It’s fairly inexpensive and comes in several colors.  The pewter turned out great because it wasn’t too shiny and fake looking. I desperately sought to escape the fake metal look, and another fake cover-up simply wouldn’t do.  The tube in my possession was originally purchased for my kitchen cabinet hardware. I wanted to see how changing the hardware from bronze to silver looked. The Rub 'N Buff did nothing for those cabinet doors, but man was it great on this chandelier.

Here’s the super simple DIY Chandelier Tutorial.

Supplies

(affiliate links)

• 2 small microfiber cloths
• 1 Tube Rub 'N Buff
• 1 Small artist paint brush (doesn’t have to be fancy)
• Paper plate
• Small roll of mesh crystals (link here but I found it in the Dollar Tree)
• Hanging Crystal Garland

How to Update Your Old Brass Chandelier

TIME INVESTMENT | About an hour | COST | About $20 if you have to purchase everything. $10 if you find the mesh at Dollar Tree. | EXPERIENCE LEVEL | Beginner

1. Clean the dust and cobwebs off. Yes, I forget to dust up there sometimes and it was pretty gross. Use a soft or microfiber cloth and wipe well. I didn't use any product because I wasn’t sure if the Rub 'N Buff would react, change color or not adhere.
2. Use your paper plate as a paint pallet and squirt a small amount onto the plate. A little goes a long way. I only need one tube and had plenty of it left. Using a small paintbrush, liberally apply the Rub 'N Buff. Smooth even strokes prevent streaking. Make sure to get the chain, chord and ceiling medallion so everything is uniform.
3. After a few minutes of dry time, buff it just a little. Use a soft cloth to gently polish away any streaks and imperfections. No elbow grease required here. Be careful not to rub off the product.
4. Next, I used some crystal mesh that I had left over from a wedding to wrap around the lights bases. Measure and cut a template, then do the rest. Adhere the mesh with hot glue (a girl’s second best friend).

I planned to be done at that point and it looked pretty good, but I still felt like it was missing something. That made me go grab a few crystal strands from this wedding chandelier leftover from my sister’s wedding. I needed a 1/2 pea-sized dollop of glue to hold the crystals in place on each end.That's it. Easy peasy lemon squeezy as my son would say. Now she’s all glammed out and looks amazing against my striped wall.

Future Chandelier Goals

I do plan to eventually swap it out with one of these lovely ladies, but I have bigger fish to fry in the kitchen.

Option 1 | Option 2 |  Option 3 (#AF)

I’m drawn to the open candle look on number two, it has a similar vibe to the one I have now, but it’s a little more contemporary. The current light also throws weird shadows at night, so I could avoid that whole issue by getting an option with shades or cups. I also love the fact that Option 3 is a little more versatile by being able to point the cups up or down.Whatever I choose it will have to flow with lighting in the kitchen and living room. Check out the full dining room. The kitchen is still sporting a 1980’s hideous fluorescent drop ceiling light. (Why was that ever considered stylish?) My living room has a ceiling fan.In any event, if you've got one of these 80's babies, then give her a quick and easy update with just a few products and a little time.What do you think of the update?